#STEMS

  • ELEVN TECHNOLOGIES

    BMX Racing Stem Aluminum 6061 T6 machined CNC.Marking of the adjustment angles on the sidewalls.Tightening Top load 2 clamps 4 screws.Sizes: 35mm, 38mm, 40mm, 45mm.Weight: 35 mm 136 g / 40mm 157 g / 38 mm 150 g / 45 mm 162 g.

    $64.99
  • INSIGHT

    CNC Forged and Machined Aluminum BMX Racing Stem.Tightening Top load 4 screws.Pivot: 1".Sizes: 35 or 40 mm.

    $54.99
  • ELEVN TECHNOLOGIES

    BMX Racing stem Aluminum 6061 T6 machined CNC.Marking of the adjustment angles on the sidewalls.Clamping Top load 2 clamps 4 screws.Pivot: 1-1/8".Sizes: 45mm, 50mm, 53mm, 57mm, 60mm.Weight: 45mm 305 g / 50mm 315 g / 53mm 335 g / 57mm 340 g / 60mm 345 g.

    $69.99
  • INSIGHT

    CNC Forged and Machined Aluminum BMX Racing Stem.Tightening Top load 4 screws.Pivot: 1-1/8 ".Sizes: 45mm, 50mm and 53mm.

    $54.99
  • ELEVN TECHNOLOGIES

    Pack of 6 screws M6xP1.0x20L in titanium of mini stem clamping.Weight: 39 g

    $34.99
  • ELEVN TECHNOLOGIES

    Replacement Screw M6xP1.0x20L grade 12.9 steel.Specific to the Elevn 1".Sold individually.

    $1.00
  • ELEVN TECHNOLOGIES

    Replacement Screw M8xP1.25x20L grade 12.9 steel.Specific to Elevn stems 1-1 / 8 " fork clamping.Sold individually.

    $1.00
  • ELEVN TECHNOLOGIES

    Replacement Screw M8xP1.25x22L grade 12.9 steel.Specific to Elevn stems 1-1 / 8 " handlebar clamping.Sold individually.

    $1.00
  • BOX COMPONENTS

    These replacement stem bolts are designed for use with the Two Center Clamp S Stem (formerly known as Hollow Mini). Each package includes four bolts and a packet of Finish Line™ Ti Prep Anti Seize.M6 x 20mm.

    $19.99
  • BOX COMPONENTS

    The Delta stem is the first, modern, 31.8 Ø, oversize stem designed specifically for BMX racing. When used with our new Jet, Triple Taper Alloy, or Box One Chromoly (aka Maximus) handlebars, you get the absolute stiffest cockpit available. This added stiffness significantly improves bike handling...

    $99.99
  • BOX COMPONENTS

    Hollow stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53-millimeter extension stem weighs just 218 grams/7.7 ounces. By...

    $69.99
  • BOX COMPONENTS

    The new Box One 31.8 Center Clamp Stem is the lightest weight oversize BMX stem on the market. Box One stems are cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very...

    $99.99
  • BOX COMPONENTS

    Box Two Center Clamp 1 Inch Stems are cold forged from the highest quality 6061-T6 aluminum. They also feature an open skeletal design and single mid-bolt wedge mounting system, making them among the lightest weight mini stems on the market. A 40-millimeter extension stem weighs just 132 grams...

    $69.99
  • BOX COMPONENTS

    Based on our Box One™ Trail Mountain Stem, Hex Lab™ Mini Stems are 3D cold forged from 6061-T6 aluminum alloy, giving them an incredible strength to weight ratio. Featuring a stiff, lightweight design, they are designed to fit handlebars with 1 inch steerer tubes and clamp diameters of 28.6mm only.

    $79.99
  • BOX COMPONENTS

    Cold-Forged and CNC Machined from 6061-T6 Aluminum Alloy Top-Load Clamp Design 40 and 45mm Extensions Available Fits 1” Steerer Tubes and Standard ø22.2 Handlebars Designed in USA/Made in Taiwan

    $49.99
  • BOX COMPONENTS

    Cold-Forged and CNC Machined from 6061-T6 Aluminum Alloy Front-Load Clamp Design 48 and 53mm Extensions Available Fits 1 1/8” Steerer Tubes and Standard ø22.2 Handlebars Designed in USA/Made in Taiwan

    $49.99
  • BOX COMPONENTS

    Cold-Forged and CNC Machined from 6061-T6 Aluminum Alloy Top-Load Clamp Design 48, 53 and 60mm Extensions Available Fits 1 1/8” Steerer Tubes and Standard ø22.2 Handlebars Designed in USA/Made in Taiwan

    $49.99
  • BOX COMPONENTS

    Cold-Forged and CNC Machined from 6061-T6 Aluminum Alloy Front-Load Clamp Design 48 and 53mm Extensions Available Fits 1 1/8" Steerer Tubes and ø31.8 Handlebars Designed in USA/Made in Taiwan

    $69.99
  • BOX COMPONENTS

    Cold-Forged and CNC Machined from 6061-T6 Aluminum Alloy Top-Load Clamp Design 48, 53, and 60mm Extensions Available 60mm Stem Available in Black Only Fits 1 1/8" Steerer Tubes and ø31.8 Handlebars Designed in USA/Made in Taiwan

    $69.99
Showing 1 - 19 of 19 items